© Martin Engineering GmbH
4
M3735UK-09/15
Introduction
The Martin Engineering products are designed for a long service life.
They conform to the state of the art in science and technology and
were thoroughly inspected before shipment. In addition to this,
Martin Engineering constantly performs product and market
research for continuous product development.
Martin Engineering offers competent support whenever
malfunctions and/or technical problems occur. Suitable actions are
taken immediately. The warranty provisions of Martin Engineering
apply and can be sent to you as needed.
2.1.4
Reference to additional documents
Reference is made in these installation instructions to the following
documents:
• Installation instructions for the MARTIN
®
Inspection door,
Publication no. M3127.
• Installation manual for MARTIN
®
TWIST™ Tensioner:
Publication no. M3296.
• Installation manual for MARTIN
®
Cable Tensioner:
Publication no. M3734.
The following standards and directives were complied with in the
preparation of these installation instructions:
• EU Machinery Directive (2006/42/EC)
• ISO/IEC Guide 37 “Installation instructions for products
used by final consumers”, 1995 Edition
• DIN 1421 “Organisation and numbering in texts”, Edition
1983-01
• DIN/EN 12100 “Machine safety - basic definitions, general
design guidelines”, Edition 2013-08
• DIN/ISO 16016 “Technical product documentation -
Protection notices for restricting the use of documents and
products”, Edition 2007-12
• DIN/EN 60204-1 “Safety of machines - Electrical
Equipment of Machines, Part 1 General requirements”,
Edition 2007-06
• DIN EN 82079-1 - Creation of user manuals - Structuring,
content and presentation, Part 1 General principles and
detailed requirements.