Maxxyz Modules User Manual
12
3. Connect the Power interconnect cable to the
MAINS OUT
connector.
4. Connect the EtherCon Network cable (
part number 11840144
) to the
WING OUT
connector.
5. Connect the IEC Power cable (
part number 11501012
) to the
MAINS IN
connector.
6. Connect the EtherCon Network cable (
part number 11840144
) to the
WING IN
connector.
2.3 Notes
If the top module is not powered, the bottom module will not be able to communicate
with the controller it is connected to.
The power switch is hidden behind the leg (if you stand in front of the controller, the
switch can be found on the left-hand side).
The modules (but
NOT
the Cerebrum module,
part number 90732140
) can also be
connected directly to a laptop or PC using a USB cable.
A non-controller module means a Playback, Submaster, Programmer or Button
module.
A controller module means a Cerebrum module or a Wing OUT connection of a non-
controller module, but can also be a Maxxyz, Maxxyz Compact or Maxxyz PC.
Important! Do not use both WING IN connections, USB and XLR, at the
same time.
The modules can also be used in combination with older playback modules. The
older modules, however, do not fit in the new frame.
Summary of Contents for maxxyz modules series
