background image

Specifications

 19

Photobiological Safety Warning

The label shown on the right is displayed on this product. If it becomes 
difficult or impossible to read, it must be replaced using the illustration on the 
right to reproduce a new label.

FCC Compliance

This device complies with Part 15, Class A, of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that 
may cause undesired operation.

Canadian Interference-Causing Equipment Regulations - 

Règlement sur le Matériel Brouilleur du Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le Matériel Brouilleur du Canada.

Intellectual Property Rights

MAC Quantum™ products are covered by one or more of these patents: 

CZ17567U;DK177579;US7498756;US8482226;

and/or one or more of these patent applications:

BR112012027036 2; BR112012027037 0; BR112012027038 9; CN102713425; CN102844612; CN102844613; 
CN102859268; CN102859269; CN103244918; CN103270437; CN2013106591049; DKPA201370715; EP2536974; 
EP2561272; EP2561273; EP2561275; EP2623856; EP2656123; EP561274; JP2013-505332; JP2013-505333; 
JP2013-505334; RU2012144005; RU2012144007; RU20122144006; US 13/642,237; US 13/991,435; US2013/0003372; 
US2013/0033865; US2013/0093360; US 2013/0201686; WO2013/029630; WO2013/139338.

and/or one or more other intellectual property rights, including one or more intellectual property rights listed on 
www.martin.com/ipr

Disposing of this product

Martin™ products are supplied in compliance with Directive 2012/19/EC of the European Parliament and of 
the Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), where applicable.

Help preserve the environment! Ensure that this product is recycled at the end of its life. Your supplier can 
give details of local arrangements for the disposal of Martin products.

This product contains a lithium battery. Ensure that it is disposed of correctly and responsibly by an authorized 
recycling or waste disposal center at the end of its life. Where applicable, Martin participates in schemes 
whose aim is to ensure that local recycling and/or waste disposal centers accept batteries from Martin 
products.

RISK GROUP 2

CAUTION

3RVVLEO\KD]DUGRXV

RSWLFDOUDGLDWLRQHPLWWHGIURPWKLV
SURGXFW
'RQRWORRNDWRSHUDWLQJODPS
0D\EHKDUPIXOWRWKHH\HV

Summary of Contents for MAC Quantum Wash

























Reviews: