background image

 4

MAC Encore Performance User Guide

Introduction

Warning! Before using the MAC Encore Performance, read the latest version of the product’s Safety 
and Installation Manual, paying particular attention to the Safety Precautions section. The Safety 
and Installation Manual is available for download from the MAC Encore Performance Support and 
Downloads page on the Martin website at www.martin.com.

This User Guide is a supplement to the Installation and Safety Manual that is supplied with the MAC Encore 
Performance. Both these documents are available for download from the MAC Encore Performance product 
pages on the Martin® website at www.martin.com. This User Guide contains information that is mainly of 
interest for lighting designers and operators, whereas the Safety and Installation Manual contains important 
information for all users, especially installers and technicians.

We recommend that you check the Martin® website regularly for updated documentation, because we 
publish revised versions each time we can improve the quality of the information we provide and each time 
we release new firmware with changes or new features. Each time we revise this guide, we list any 
important changes on page 2 so that you can keep track of updates.

You can also see the full product specifications and a range of useful documents such as 2D and 3D 
drawings from the MAC Encore Performance product pages at www.martin.com.

Summary of Contents for MAC Encore Performance CLD





































Reviews: