32
MAC Encore Performance User Guide
*High temperature warnings are canceled as soon as temperature returns to normal. If temperature reaches
cutoff level, the warning is replaced by a cutoff error message.
Error messages
Error messages indicate that a problem is present. The MAC Encore Performance communicates errors as
follows:
• Error messages flash in the display.
• If more than one error is detected, the fixture flashes all errors three times each.
• Errors are shown in the display regardless of display status: they override an inactive display and any
other information that the display might be showing.
• If an error is present, the status LED flashes red.
The possible error messages are listed in Table 5 below
:
SERV
SERVICE MODE
Fixture in service mode.
SLW
SAFETY LOOP
A safety loop error occurred but is no longer active. Warning message is cleared at the next
power off/on cycle.
UITW
UI TEMP HIGH
User interface (LCD display and control panel) PCB sensor detects abnormally high operating
temperature.*
ZFTW
ZF TEMP HIGH
Zoom PCB sensor detects abnormally high operating temperature.*
Short code
Long message and explanation
APER
AW POS ERROR
Animation wheel position error.
ARER
AW ROT ERROR
Animation wheel rotation error.
BEER
BEAM SHAPER POS
Beam shaper position error.
BETC
BEAM TMP CUT OFF
Beam temperature cutoff activated.
BETE
BEAM TMP SEN ERR
Beam temperature sensor error.
C1ER
COLOR WHEEL 1 ERR
Color wheel position error.
CECM
COMM ERR CMY
CMY flags position system communication error.
CEEF
COMM ERR EFFECT
Effects position system communication error.
CELD
COM ERR LED DRV
LED driver communication error.
CEPT
COM ERR P/T
Pan/tilt driver communication error.
CEZF
COM ERR Z/F
Zoom/focus driver communication error.
CMTC
CMY TEMP CUT OFF
CMY module temperature cutoff activated.
CMTE
CMY TEMP SEN ERR
CMY module temperature sensor error.
Table 5: Error messages
Short code
Long message and explanation
Table 4: Warning messages
