10
MAC Encore Performance User Guide
Control panel operations
You can configure individual fixture settings (such as the MAC Encore Performance’s DMX address), read
out data, execute service operations and view error messages using the fixture’s backlit graphic display and
control panel.
When the MAC Encore Performance is powered on, it first boots and resets, then it displays its DMX
address (or its fixture ID number, if one has been set) and any status messages (see page 31) in the display
A
.
The display can be set to automatically rotate to match standing or hanging fixture orientation in the
PERSONALITY
→
DISPLAY
menu or the Shortcuts menu (see “Shortcuts” on page 11).
Using the control panel
• Press the Menu button
A
or Enter button
C
to access the menus.
• Use the Up and Down buttons
B
to scroll up and down menus.
• Press the Enter button
C
to enter a menu or make a selection.
• The currently selected item in a menu is indicated by a star
.
• Press the Menu button
A
to step backwards through the menus.
Status LED
The LED
D
next to the control buttons indicates fixture status depending on the color displayed and DMX
status depending on whether the LED flashes or lights constantly:
•
GREEN
: All parameters normal.
•
AMBER
: Warning (service interval exceeded, for example).
If
ERROR MODE
is set to
Normal
, the warning message will be shown in the display. If
ERROR MODE
is
set to
Silent
, the display must be activated by pressing the Enter button C to display the warning
message.
•
RED
: Error detected.
If
ERROR MODE
is set to
Normal
, the error message will be shown in the display. If
ERROR MODE
is set
to
Silent
, display the error message BY GOING TO NORMAL OR SERVICE - ERROR LIST.
•
FLASHING
: No DMX signal detected.
•
CONSTANT
: Valid DMX signal detected.
C
Figure 4: Display and control panel
1
DMX ADDRESS
DMX RANGE
1–33
E
D
A
B
B
A - Menu
B - Up/Down
C - Enter
D - Status LED
E - USB port
