Control panel
13
Manual control
The manual control menu (
M A N
) provides commands for turning the lamp on (
L O N
), turning the lamp off (
L o F F
),
and resetting the fixture (
R S T
). It also permits you to position and move individual effects.
Service utilities
Important! Enter must be held for several seconds to access the utilities menu.
F e e d b a c k t o g g l e s
An on-the-fly position correction system monitors the gobo and color wheels, rotating gobos, and the animation wheel.
If a position error is detected, the shutter closes while the effect resets. This feature can be disabled by turning effects
feedback (
U T I L > E F F b
) off.
The automatic pan/tilt position correction system may be temporarily turned off under
U T I L > F E b A
. The off
setting, however, is not saved and the system will be re-enabled the next time the fixture starts. If the system cannot
correct the pan/tilt position within 10 seconds, feedback is automatically disabled.
A d j u s t m e n t
The adjustment menu (
U T I L > A d j
) provides manual control for making mechanical adjustments. See page 33.
S o f t w a r e u p l o a d
The upload mode command (
U T I L > U P L d
) prepares the fixture for a software update. This command is not
necessary, however, as upload mode is engaged automatically by the uploader.
Downloaded from
www.Manualslib.com
manuals search engine
