Martin MAC 350 Entour User Manual Download | Manualshive

Page: 7 / 48

background image

Introduction

7

Introduction

Thank you for selecting the MAC 350 Entour™, an intelligent lighting fixture from Martin Professional™.
This moving-head spotlight features:

• Seven Luminus CBT-90 (50 W) LEDs

• Minimum LED lifetime: 60 000 hours (to >70% luminous output, manufacturer’s figure under

manufacturer’s test conditions, see “Service and maintenance” on page 25)

• Motorized rotating gobo wheel with 6 interchangeable gobos plus open, indexing, continuous gobo

rotation & scrolling, shake

• Motorized color wheel with 8 interchangeable color filters plus open

• Motorized iris

• Electronic shutter with instant intensity control, 2 - 9 Hz strobe effects, pulse effects and shutter fading

• Music-triggered operation available for all effects

• Motorized focus, 2 m (6.5 ft.) to infinity

• 630° of pan and 300° of tilt

• DMX control

• Music trigger

• Onboard control panel and LED display

• Stand-alone operation with up to 100 programmable scenes

• Synchronized (master/slave) stand-alone operation

• 10 pan/tilt and 10 effects macros, freely combinable, selected via DMX or onboard control panel

• Staggered start/macro chase

• DMX effects capture in stand-alone programming

• Fine (16-bit) control of gobo rotation, pan and tilt

• Effects access hatch for fast, tools-free gobo and color filter changes

For the latest firmware updates, documentation, and other information about this and all Martin Professional
products, please visit the Martin website at http://www.martin.com

Comments or suggestions regarding this user manual may be e-mailed to [email protected] or posted to
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le

Matériel Brouilleur du Canada.

Unpacking

The MAC 350 Entour is packaged in a cardboard box. The following items are included:

• Two omega clamp attachment brackets with quarter-turn fasteners (P/N 91602001)

• Neutrik PowerCon NAC3FCA AC mains power input connector (P/N05342804)

• This user manual

A 4-unit flightcase is available as an accessory (see “Accessories” on page 45).

«
...
5
6
7
8
9
...
»

Summary of Contents for MAC 350 Entour

















































Reviews:

No comments

Related manuals for MAC 350 Entour

Brand: York Pages: 16

i.Profiler plus

Brand: Zeiss Pages: 66

Brand: Vaillant Pages: 76

Brand: H2flow Pages: 2

Brand: V-TAC Pages: 27

Brand: Yacht Sentinel Pages: 32

Brand: X-FLOC Pages: 35

Brand: Öhlins Pages: 8

Brand: &Tradition Pages: 3

Flowerpot VP3 Verner Panton 1968

Brand: &Tradition Pages: 3

Brand: ?HC Pages: 2

FLOWERPOT GARDEN VP5

Brand: &Tradition Pages: 4

FLOWERPOT GARDEN VP3

Brand: &Tradition Pages: 4

Brand: &Tradition Pages: 4

Brand: Parkside Pages: 37

ARCHISHAPE 2.0 Linear

Brand: Osram Pages: 7

Brand: Sagitter Pages: 12

Brand: Invacare Pages: 271

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands