Martin Engineering M4097-05/18
2
Martin
®
Air Cannon Controller - multiple circuit
Figure 1. Flow switch inputs open, controller disabled
References
The following documents are referenced in this manual:
• American National Standards Institute (ANSI) z244.1-1982,
American
National Standard for Personnel Protection - Lockout/Tagout of Energy
Sources - Minimum Safety Requirements,
American National Standards
Institute, Inc., 1430 Broadway, New York, NY 10018.
• Federal Register, Volume 54, Number 169, Part IV, 29 CFR Part 1910,
Control of Hazardous Energy Source (Lockout/Tagout); Final Rule
,
Department of Labor, Occupational Safety and Health Administration
(OSHA), 32nd Floor, Room 3244, 230 South Dearborn Street, Chicago,
Illinois 60604.
•
The National Electrical Code (NEC),
National Fire Protection Association,
1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101.
Safety
All safety rules defined in the above documents and all owner/employer safety
rules must be strictly followed when working on this equipment.
Material required
Only standard hand tools are required to install this equipment.
Controller
Power in
Out to air
cannons (1–10)
Flow
switch
Belt travel
Flow switch
ENABLE
(+124)
(ENABLE)
Introduction