Status
messages
23
Status messages
message reason
The heaters are Off, the unit is shut down.
The unit is heating up to operating temperature.
The heater is at operating temperature, but Haze is not
turned on (RUN set to STBY or HAZE set to 0%).
The heater is at operating temperature and the unit is under
DMX control.
The heater is in run mode and is producing haze.
The machine has detected an error with its calibration
settings and will not operate. Call Martin Service.
The machine has detected an error in the temperature
sensor and will not operate. Call Martin Service.
The machine is running a cleaning cycle which lasts 90
seconds (number may be 89 to 0)
There is no gas pressure in the cylinder.
The gas pressure is too low to operate and the machine will
turn off in approximately 20 minutes.
(on start-up) The internal battery is low and the last shutdown
did not complete. If this message displays on every start-up,
call Martin Service to obtain a replacement battery.
Res etti ng th e machi ne af ter f luid out
If the machine runs out of fluid simply refill the fluid container and follow the
priming instructions on page 15.