Martin ExteriorWash 200 Series, User Manual

Page: 5 / 32

Exterior Wash
TM
200 Series User Manual
5
Safety information
WARNING!
Read the safety precautions in this manual before installing, operating or servicing
this product.
The following symbols are used to identify important safety information on the product and in this
manual:
Warning! Safety hazard. Risk
of severe injury or death. Warning! Hot surface. Risk of
burns.
Warning! See user manual for
important safety information. Warning! Risk of eye injury.
Wear protective eyewear.
Warning! Hazardous voltage.
Risk of lethal or severe
electric shock.
Warning! Do not look into
light output.
Warning! Fire hazard.
Warning! Risk Group 3 product according to EN 62471. Do not look directly into the beam.
Do not view the light output with optical instruments or any device that may concentrate the
beam.
This lighting fixture is for professional use only and must be installed by a qualified
technician. It is not for household use. It presents risks of severe injury or death due to fire
hazards, electric shock and falls. It produces a powerful, concentrated beam of light that
can create a fire hazard or a risk of eye injury if the safety precautions below are not
followed.
Install, operate and service Martin™ products only as directed in their user manuals, or
you may create a safety hazard or cause damage that is not covered by product
warranties. Follow the safety precautions listed below and observe all warnings in this
manual and printed on the product. Keep this user manual for future use.
For the latest user documentation and other information about
this and all Martin™
products, please visit the Martin website at http://www.martin.com
If you have any questions about how to install, operate or service the fixture safely, please
contact your Martin™ distributor (see www.martin.com/distributors for details) or call the
Martin™ 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.
Respect all locally applicable laws, codes and regulations when installing, operating or
servicing the fixture.
Protection from electric shock
Ensure that the fixture is electrically connected to ground (earth).
Disconnect the fixture from AC power when not in use.
Supply the fixture with AC power only at the voltages specified in this user manual and on
the product’s serial number label.
Do not open the fixture or remove any cover. Refer any service operation not described in
this manual to an authorized Martin Service partner.