18 Exterior
Wash
TM
100 Series User Manual
DMX data link layout
Connect the wires in the data cable as shown below. Do not connect the shield conductor to ground
(earth) or allow it to come into contact with a connector shell, as this may cause interference.
Wires
Input pair (red tube)
Output pair (black tube)
Shield
Wire color
White/green Green White/brown Brown Black
Signal
DMX in +
DMX in -
DMX out +
DMX out - Common
Male XLR connector (if used)
Pin 3
Pin 2
-
-
Pin 1
Female XLR connector (if used)
-
-
Pin 3
Pin 2
Pin 1
Data connections
1 = DMX shield (black)
2 = DMX in – (green)
3 = DMX in + (white/green)
4 = DMX out – (brown)
5 = DMX out + (white/brown)
DMX link connections
