4. See Figure 16. Replace the main fuse on the PCB with one of the
same type and rating.
5. Reinstall all covers before reapplying power.
If a fuse blows repeatedly, refer to your Martin Architectural supplier for
service.
Voltage setting
See Figure 16. The voltage switch on the PCB is factory-set to match
100-120 or 200-240 V nominal AC power at 50 or 60 Hz.
Important! Do not change the voltage setting without first
consulting your Martin Architectural supplier.
230V 115V
230V 115V
Figure 16: Main fuse
Main fuse
www.carlosmendoza.com.mx
Summary of Contents for Cyclo Directional IP65
Page 1: ...user manual Cyclo Directional IP65...
Page 47: ......