Service manual
9 of 20
Atomic 3000 LED - Revision A, 11-30-2017
Figure 12:
Removing the back light reflector ass.
Figure 13: Removing the four screws
Figure 14: Disconnecting connectors
Replacing the main light engine
assembly
1.
Remove both back light reflector assemblies. See
“Replacing the back light reflector assembly” on
page 7.
1
2.
Remove the four Torx20 screws (2).
4
3.
Remove the connector for the thermo switch (3)
and temperature sensor (4).
2
2
3
