PB8
44
Figure 1
Figure 2
Figure 3
Figure 4
COMB BINDER
GB
IMPORTANT SAFETY NOTES
Mount the machine in a stable po-
sition for use (on a level surface).
Always ensure the machine is
mounted out of the reach of chil-
dren.
If the cutter is to be used by chil-
dren in certain circumstances, they
must be supervised by a responsible
adult.
Repairs should only be carried out
by a qualified specialist.
To ensure safety, only original
Martin Yale spare parts should be
used.
«
«
«
FUNCTIONAL ELEMENTS
Legend
1 Edge guide
2 Plastic comb holder
3 Punching plate
4 “Lock” button
5 Punching slot
6 Binding handle (R)
7 Plastic hook
8 Binding handle (L)
9 Lid of waste bin
SET UP FOR PUNCHING AND
BINDING
Press down the punching plate, and then
move „lock button“ towards right end (see
figure 2).
-
So release the punching plate to the top posi-
tion (see figure 3).
-
The machine is designed for binding using
plastic comb of 6-12 mm. From figure 4 you
can read off the appropriate binding comb
size for the number of sheets you are bind-
ing.
The diameter of the comb must be slightly
large than the thickness of the documents.
If the comb diameter is too small than the
pages will not lie flat, this will cause difficulty
when turning pages.
-
-
-
Take out the machine from the package box,
the punching plate is on „lock” position.
Warning!
Please don‘t operate the machine
when the “lock” button is in the
„lock“ position.
The „lock“ button in the „lock“ po-
sition is only for stored.
-
CHOOSE THE CORRECT
PLASTIC COMB
Summary of Contents for Papermonster PB8
Page 1: ...Papermonster 9 32 Personal Plastic Comb Binding Machine PB8 Instruction Manual ...
Page 15: ...PB8 14 ...
Page 16: ...PB8 15 ...