Martin Yale Industries Papermonster PB8, Operating Instructions Manual, Page: 6 / 17

PB8
5
Figure 5
Figure 6
Figure 7
GB
COMB BINDER
MALFUNCTION
DISPOSING OF THE MACHINE:
Dispose of the machine in an envi-
ronmentally sound fashion at the
end of its usefull service life. Do not
dispose of any of the parts included
in the machine or its packing with
household trash.
SPECIAL ACCESSOIRES
Description Order-No.
XXXXX x xxxx
Note:
For orders of special accessoires and spare parts, please contact your dealer.
TECHNICAL DATA
PUNCHING
Set the paper format to be used with sliding
the edge guide (see figure 5).
Put the required number of paper sheets/
documents into the punching slot, taking care
to line up edge of paper against the edge
guide.
Then press down the punching plate.
Rise up the punching to the original position,
remove the punched document.
Warning!
Max. Punching capacity is 6 sheets
(80gsm paper) per operation.
-
-
-
-
BINDING
Place the plastic comb in the back of “plastic
comb holder” with the side to be opened up-
permost.
Slide it over horizontal plastic comb holder.
Fully open the comb by pulling both binding
handles backwards simultaneously.
Place the punched paper stack onto the
opened binding comb ensuring that all tips of
the plastic comb are through the holes in the
paper.
Start with the front cover, last of all, onto the
back cover.
Remove the bound document.
Note:
Always push/pull binding handle
(left/right) together or you may
damage the machine.
-
-
-
-
-
-
Binding Style:
Plastic Comb 21 Ring A4
Max Punch Capacity:
8 sheets (80g) per ‘lift’ , 1 sheet Clear PVC 180 Micron
Max Bind Capacity: 12 mm Wire, Approx 120pp x 80gsm
Punch Hole Depth: Fixed
Net Weight: 1,8 kg
Dimensions:
360 x 155 x 85 mm
CLEANING THE WASTE CHIP
You should upside the machine when you
clean the waste bin shown as in figure 7.
Open the lid and empty the waste chip into
dustbin, then close the lid. -
-
Warning!
Be sure to clean Waste Bin fre-
quently.
Overloaded Waste Chips could
cause punching jam and machine
damage.