9
STEP 6: INSTALL WHEEL ASSEMBLIES
1)
Assemble the bearing retainer, hub, wheel, and side treader wheel (if used) as shown using the 4
bolts (BCS0123) and flange nuts (NSFL003) Torque the bolts to 23 ft
-
lbs, and retighten after the
first days use
2)
Install the assembled wheel unit by passing the flange bolt (BFS0156) through the bearing center
and washer (WN0064) and attach to the frame using the flange nut (NSFL007), tighten to 116 ft
-
lbs.
(NOTE: When using deflector (scraper) refer to step 7 before completing the installation)
3)
The wheel marked TW3813
-
L4 (Or RTW1412.5
-
L4 for the Razor wheel) is for use on the left side
of the frame (as viewed from behind the machine). Repeat for opposite side.
DUST CAP
(HS1328)
5/8”
X 3
FLANGE BOLT
(BFS0156)
3/8”
FLANGE
NUTS
(NSFL003)
OPTIONAL SIDE TREADER
WHEEL
(STE
-
04A)
HUB
(CHU44
-
B2)
BEARING RETAINER
(BC
-
01)
WHEEL (LEFT)
(OPTIONAL RTW1412.5L4 SHOWN)
WASHER
(WSN0064)
FLANGE NUT
(NFSL0007)
