D
-
LOCK DEFLECTOR
(DLD
-
02L)
HUB
(HA44270
-
D)
FRAME
(FR1360)
RIGHT HAND 4 HOLE
WHEEL
(RTW1412.5R4)
5/16”
x
1/2”
BOLT
(B5M516NC12)
&
5/16”
NUT
(N516CH)
3/8”
FLANGE NUT
(N38CFL)
3/8”
x 1
3/4”
CARR. BOLT
(B5C38134)
5/8”
FLANGE PATCH
BOLTS (B5F58NC134)
SIDE TREADER
WHEEL
(STW
-
04)
LEFT WHEEL ASSEMBLY
NOTE:
The bevel cut is positioned
“
outward
”.
STEP 6: INSTALL WHEEL ASSEMBLIES (CONT.)
IMPORTANT: Skip to
Step 6C
if not using optional D
-
Lock Deflector (Scraper)
STEP 6B: INSTALL WHEEL ASSEMBLIES USING OPTIONAL D-LOCK DEFLEC-
TOR (SCRAPER)
1)
Attach the D
-
lock deflector (DLD
-
02L) to the end of the hub axle, making sure it is flush with the
end of the axle, before bolting the axle to the frame. (For placement of
5/16”
stop bolt see fig-
ure on previous page)
2)
Secure the hub to the frame with the
5/8”
flange patch bolt. Using a torque
-
wrench, tighten to
112 ft
-
lbs. Re
-
tighten after first day
’
s use.
3)
Install the wheel (part # to the outside) and side treader wheel on the hub, using the four car-
riage bolts and flange nuts. Torque to 23 ft
-
lbs. Re
-
tighten after first day
’
s use.
4)
The wheel marked RTW1412.5R4 ( Razor wheel) orTW3813
-
R4 ( Spike wheel) is for use on the
right side of the frame (as viewed from behind the machine). Repeat for opposite side.
8
