STEP 6: INSTALL WHEEL ASSEMBLIS (CONT.)
STEP 6C: INSTALL WHEEL ASSEMBLIES USING STANDARD D-LOCK
1.
Attach the D
-
lock to the end of the hub axle making sure it is flush with the end of the axle be-
fore bolting the axle to the frame.
2.
Secure the hub to the frame with the
5/8”
bolt. Using a torque
-
wrench, tighten to 112 ft
-
lbs. Re
-
tighten after first day
’
s use.
3.
Install the wheel (part # to the outside) and side treader wheel on the hub, using the four car-
riage bolts and flange nuts. Torque to 23 ft
-
lbs. Re
-
tighten after first day
’
s use.
4.
The wheel marked RTW1412.5R4 (Razor wheel) orTW3813
-
R4 (Spike wheel) is for use on the right side
of the frame (as viewed from behind the machine). Repeat for opposite side.
9
HUB (
HA44270
-
D)
3/8”
FLANGE NUT
(N38CFL)
RIGHT HAND 4 HOLE
WHEEL
(RTW1412.5
-
R4)
FRAME
(FR1360)
D
-
LOCK
(DLR
-
01)
5/8”
FLANGE PATCH BOLTS
(B5F58NC134)
3/8”
x 1
3/4”
CARR.
BOLT
(B5C38134)
SIDE TREADER
WHEEL
(STW
-
04)
LEFT WHEEL ASSEMBLY
NOTE:
The bevel cut is positioned
“
outward
”.
