Compact
Scarecrow
-
location and assembly
Unit Location and Assembly
Where to locate the Compact Scarecrow for best results
The Compact is most effective when the unit is situated as high as possible above the birds.
Obviously this is not possible where birds such as pigeons are in woodland but, if located high
enough on a pole or similar structure, they should lift from the fields. A height of at least 2m
above the birds is ideal, with the unit angled slightly downwards if possible.
If a unit is being used in a barn, to remove Starlings for example, users should locate the
Compact at the highest point possible for best effect, ideally using the wall fitting kit. Some
experimentation may be needed to find how the unit works best in each situation
-
different
species react with varied urgency.
However and wherever it is located the Compact must be properly secured so that wind and
animals cannot dislodge it. Fitting accessories are available to assist this (see below).
The Compact outer casing has been specifically designed with a sloping top to ensure
that any rain water runs off the top of the unit. When assembling the unit, please ensure
that the control panel is located at the base of the unit so that the ‘Scarecrow’ logo, on the
front, is not upside down. The control panel is not waterproof and must be kept dry.
Always ensure that the plastic covers are replaced after any adjustments have been
completed.
Assembling and Mounting the Compact 200 Master Unit
Wall Mounting
Attach the unit to a wall using the bolts, nuts and washers supplied or alternative appropriate
wall fixings.
Pole Mounting
Fit the unit to a suitable pole (such as a scaffold pole) using the two U clamps and the bolts, nuts
and washers supplied.
5
