manualshive.com logo in svg

Martin Audio Wavefront W8CT, Application Manual

Share
Download
Martin Audio Wavefront W8CT Application Manual Download Page 35

Cabinets may be fitted with rear hinge back plates to allow removable hinges to be
slotted in place. These hinge assemblies provide a more rigid rear cabinet alignment.

For further information please refer to the Martin Audio Wavefront 8 Flying System
User Guide.

Rigging Schools!

Rigging should not be undertaken by untrained or unqualified personnel.

Suitable rigging training sessions may be arranged by calling Martin Audio Ltd on
+44 (0)1494 535312.

Important note on flown systems examples

Wavefront cluster examples are included in this manual to illustrate recommended
loudspeaker combinations and splay angles only. Note that very large clusters -
particularly those including Wavefront Longthrow elements - may need to be flown
in multiple layers to maintain the 12:1 safety factor of the standard Martin Audio
Wavefront 8 Flying System.

SAFETY NOTE!

Two female "keyhole" stud plates are fitted to each side of Wavefront cabinets to
allow cabinets to be flown up-side-down for certain applications. The upper keyhole
is the only one ever used - whatever the configuration.

All material © 2007. Martin Audio Ltd. Subject to change without notice.

Summary of Contents for Wavefront W8CT
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands