manualshive.com logo in svg

Martin Audio Wavefront W8CT, Application Manual

Share
Download
Martin Audio Wavefront W8CT Application Manual Download Page 165

 
 

5.5.6  

Array Type 

 

 

 
The choice of loudspeaker type depends on the application. See W8L Series 
Applications Guide

 

Section 5.4

 

 
If a mixed system is selected a further section to the right allows you to define the 
quantity of the lower cabinets. 
 

 

 
 

5.5.7  

Array Fixing 

 

Select either 

Fly

 or 

Stack

 in the 

Fixing

 section to determines how the array is 

supported. 
 

 

 
 

In 

Fly

 mode the grid is suspended and cabinets are attached beneath  

 

In 

Stack

 mode the grid forms a base and cabinets are placed on top. Ground 

Stack Bars are fixed between the grid and the rear splay holes of the lowest 
cabinet to set the overall system tilt. 

 

 
 
 
 
 

 

All material © 2007. Martin Audio Ltd. Subject to change without notice.

Summary of Contents for Wavefront W8CT
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands