WPM System
USER GUIDE
WPM
User Guide v1.0
Page 48
Lift the next cabinet on top of the previous one and secure both the front corners with further Rigging Pins. At the rear,
rotate the upper cabinet’s mounting plate so that it engages with the slot in the lower cabinet’s bracket, and set the angle
between the first and second cabinets by fitting a Rigging Pin in the appropriate hole on the lower bracket according to the
DISPLAY software prediction.
Fig.46 - insert rigging pin
Fig.47 - insert rigging pin
Repeat the previous steps twice to add the two remaining WPM cabinets, while referring to the angles which have been
defined by the DISPLAY software. Take care to set the correct angles.
The connections to the WPM array are most conveniently made at this stage.
