WPM System
USER GUIDE
WPM
User Guide v1.0
Page 45
Pole Mounting WPM with the Pole Mount and Universal Bracket
Start with the MSX Passive subwoofer face down on its wheelboard. Rotate the four dropdown brackets located in the base
of the MSX Passive so they are protruding outwards.
Fig.34 - MSXP subwoofer
Fig.35 - rotate dropdown brackets
Attach the Outrigger to the bottom of the MSX Passive cabinet by mating these dropdown brackets with the holes in the
baseplate box sections as shown. Use the front location as indicated on the baseplate membrane for this configuration (the
rear location is only needed for larger configurations). With the MSX Passive on its wheelboard and the front edge of the
Outrigger on the floor, the dropdown brackets should align with the correct holes. Secure all four dropdown brackets with
Rigging Pins.
Fig.36 - attach outrigger
Fig.37 - secure outrigger
