WPM System
USER GUIDE
WPM
User Guide v1.0
Page 37
Landing the Array
To land the array simply reverse the above procedure.
Position a transport case under the array, and lower the array to a convenient working height. Take the weight of the bottom
four cabinets and release the front Rigging Pins from the top of the fifth cabinet, allowing the bottom four cabinets to rotate
downwards and backwards, supported by the drop link on the fourth cabinet.
Fig.14 - rotate block downwards
Fig.15 - remove rigging pin
Lower the array so that the bottom four cabinets are landed on to a transport case.
Release the drop link from the fourth cabinet and stow it for transportation.
Lower the array, take the weight of the remaining four cabinets, and release the Rigging Pins from the Flying Frame.
Lower the cabinets face down on to a transport case.
