E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
WARNING
Installation MUST carry out by a qualified and licensed electrician.
Dimming
The Elite ceiling fan has a smart 3 step dimming LED light module which doesn’t require a dimmable remote control or a wall dimmer.
It only requires a normal on/off remote kit (MPREMS) or a normal light wall switch. (Supplied in remote control kit).
Turn the switch on and the light will turn on. Flick the switch on/off within 1 second and the light output will dim down to approx. 50%.
Flick the switch on/off again and the light output will dim down to approximately 15%. The light kit has no memory function, It will turn
on 100% initially.
Instructions and Functions of Transmitter
Setting the code on transmitter
1. Remove battery cover
2. Slide code switches to your
choice of ON/OFF position
3. Install battery (supplied)
Setting code on receiver:-
1. Slide code switches on the
receiver in the same position
set on the transmitter
NB: Martec Remotes - MPREMS (as
illustrated on the left), MPLCDS and
MAPP are sold separately.
Installing Receiver Remote Control
Receiver
Installation of transmitter wall mount
holder with two screws.
Brown
Blue
AC Power Input
Antenna
To Fan/Light/neutral
To Light/Live
To Fan/Live
Green
Blue
Fan Motor
Black
L
N
