02 8778 7500
|
|
www.martecaustralia.com.au
INSTALLING RECEIVER REMOTE CONTROL
Please note: Receiver must be correctly installed in the mounting bracket on fan
When the transmitter cannot control the receiver, please check the battery has sufficient charge in the
transmitter.
When the transmitter cannot control the receiver, please check if there is any existence of similar remote
controlled products nearby, causing interference with each other.
Low power of battery will affect the sensitivity of the transmitter and the signal reception accordingly,
must replace if the battery is getting low power.
Please take the battery out from the transmitter when leaving unused for a long time, to avoid battery
leaks.
Supporting 200W lighting power at maximum.
Isolation Switch “Must be connected in the line.”
When power is cute to the unit (via a blackout or otherwise) when power is restored the light will come on.
The dimming switch on the light models is operated by turning the light ON/OFF button within 1 second.
The light will dim in stages from 24W to 9W to 3W approx.
IMPORTANT REMINDERS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Page 7
