10
SETTING PROGRAMS AND MODES
Automatic programs "Bread / Cake","Def / Ferm"(Defrosting / Fermentation),"Cookie / Tart ","Meat / Potato" can be selected by pressing the"Menu" button (19). Note: The quality of the dishes
obtained as a result of using automatic programs depends on the products used, their weight and proper preparation.
The heating elements mode can be selected by pressing the button «Select»:
▪
Up-heat – the upper heating elements operating mode (15)
▪
Low-heat - the lower heating elements operating mode (16)
▪
All heat - all heating elements operating mode (28)
You can change both the cooking time and the temperature in the programs. To do this, after selecting the program, press the "Time / Temp" button (20), set the desired time (up to 120
minutes) by pressing or holding the "+" or " - " buttons (21). Then press the "Time / Temp" button again and set the desired temperature. To start the program, click the "Start / Cancel"). The device
will start working. After the set time has elapsed, the device will turn off and notify you with an audible signal that the set program has been completed.
The convection mode can be switched on and off by pressing the "Conv" button (23) before the program starts. During the operation of the convection, the display shows the
indicator of the operation of the convection mode (24).
Pre-set – delayed start up to 24 hours
This function is to activate the execution of the program after the required time interval within 24 hours. To program the delayed start, turn on the appliance and, in standby mode, press the "Pre-
set" button (32), set the desired time by pressing or holding the "+" or "-" buttons before starting a programm by pressing or holding the "+" or " - " buttons, then proceed to select the preferred
program, cooking time and heating temperature. The corresponding indicator (11) and time before start will be displayed on the display.
The table below shows the available time and temperature setting ranges, as well as the default program settings.
Designations: «
+
» – heating elements are on, «
///
» - usage not available.
OFF/ON – disabled by default. Activation is available by pressing the button «Conv» (23).
ON/OFF – enabled by default. Deactivation is available by pressing the button «Conv» (23).
SWITCHING OFF
The device will automatically turn off when the time set on the timer expires. The device can be turned off at any time by pressing the "Start / Cancel" button. / Cancel) (33).
WARNING: Always turn off the unit when cooking is finished.
Disconnect the appliance from the power supply. Do not pull on the wire, only hold on to the plug. Always allow the appliance to cool down completely before you put it away.
Function
Time Range
Default Time
Temp. Range
Default Temp.C
Upper Heat
Lower Heat
Convect.
Pre-set
0:01-24:00
0:10
///
///
///
///
///
Up-heat
0:01-2:00
0:45
80
℃
-200
℃
180
YES
///
OFF/ON
Low-heat
0:01-2:00
1:00
80
℃
-200
℃
160
///
YES
OFF/ON
All heat
0:01-2:00
0:20
80
℃
-230
℃
220
YES
YES
OFF/ON
Def. / Ferm.
0:01-10:00
0:40
25
℃
-80
℃
30
///
YES
ON/OFF
Bread/Cake
0:01-2:00
0:20
140
℃
-170
℃
160
YES
YES
ON/OFF
Cookie Tart
0:01-2:00
0:25
160
℃
-190
℃
180
YES
YES
ON/OFF
Meat Potat
0:01-2:00
1:00
180
℃
-230
℃
200
YES
YES
ON/OFF
