MT-2697
4
Maximum water level should be lower than the edge of the mist nozzle!
Never use water with temperature higher than
40˚С
.
Place the lid (2) on the water tank
CAUTION
: During the appliance functioning it is prohibited to remove the water tank!
Wipe dry the appliance by soft cloth
Wait about 30 seconds
Plug in the appliance
Before firts use of the remote control remove plastic isolation from the battery compartment.
Press
on the control panel (7) or at the remote control (7) to start operating the appliance. Minimum power at the appliance start is a default setting.
To choose the power level press
on the control panel (8) or on the remote control (8). There are three power levels: 1-low, 2-medium and 3-high. Chosen power level is shown at LED display with
indication (13). Maximum appliance power is 350 ml / hour.
Humidistat mode:
is used to auto keep certain humidity level .Press
on the control panel (9) or on the remote control (9) to set required level in between 45% to 90% with 5% for the each
change step.of 5%. You see required relative humidity indication on display (14). After humidity reaches required level, the appliance shut off automatically. If humidity is llower than required level, the
appliance will start operating automatically. Humidistaat mode activity is dispayed as indication (19).
Auto shut off with Timer:
the appliance shut off automatically after required time. You can choose out of 1 to 12 hours with each step change of 1 hour. To activate auto shut off with Timer press
on the control panel (11) or on the remote control (11). Setted Timer mode will be indicated on display as (15) indication.
А
uto shut off if water is not enough:
The appliance automatically shuts off if the level of water below the certain point in the water tank.
If water is not enough, the sound signal will be activated and display will show indication (16). The appliance automatically shuts off within several seconds after sound signal.
CAUTION
: It is prohibited to use auto shut off as regular shut off way.
To continue fill the water tank with water. This is a valuable feature of this appliance
–
you can add water without interrupting using the appliance. Remove the lid (2) and add water to the water tank
according to the manual. Than put the lid back to the place.
The appliance has night LED light. Press
on the control panel (12) or on the remote control (12) to activate LED night light. Activated night light mode is shown at display (17).
The appliance has Warm air function. To start it press
on the control panel (10) and on the remote control (10). The indication of warm air (18) is lighting on the display.
At the bottom part of the base there is a compartment with the sponge for aroma oils. Open the compartment and add on the sponge 2-3 drops of aroma oil. Than put the compartment lid back on the
palce. The appliance will spread particles of aroma oil together with water drops. It is recommended to wash the sponge with soap solution after each use. Dry compleately the sponge before use.
CAUTION:
It is prohibited to add aroma oil to the water in the water tank.
NOT
Е
:
During using the appliance may be heard a sound of folling drops / flowing water. This is normal and not a defect.
CAUTION:
If you do not use the appliance for a long time, drain the water out of water tank.
