6
GBR USER MANUAL
IMPORTANT SAFEGUARDS
Please read this instruction carefully in order to avoid damage due to incorrect use and keep it in a safe place for future references.
Before the first using check that permissible voltage of the appliance corresponds to the voltage of your home electrical supply network.
Incorrect handling can cause damage to the device and cause damage to the user.
For home use only. The appliance is not intended for industrial or commercial use. For indoor use only.
Always unplug the appliance from the power supply when not in use. Do not pull the cord. Always take the plug. Do not reel the cord around the device housing.
Never carry or suspend the appliance by the cord.
Do not leave the appliance switched on when you do not use it. Do not place the appliance on a surface while it is operating.
Keep the power cord away from sharp edges and hot surfaces.
Do not operate after malfunction or damage of the cord or electric plug or other injuries and after the fall of the appliance.
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
Do not use the appliance with a damaged or broken comb or with teeth missing from the blades as injury may occur.
Make sure before use that blades are aligned properly.
Never drop or insert any object into any opening on the appliance.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety. Close supervision in necessary when it is used near children.
To avoid electric shock and fire, do not immerse in water or other liquids. If that occurs, immediately unplug the appliance and contact service center for inspection.
Do not use the appliance into a bathroom or near a water supply source (water-filled tubs, basins, sinks or other containers. Do not touch the appliance by wet hands.
Before putting the appliance in storage it must be completely cooled down & dried.
PLEASE SAVE THiS INSTRUCTION!
BEFORE FIRST USE
Remove all packaging materials.
Before the first use of the appliance completely discharge and then charge the battery. It takes about 8-10 hours to charge the battery. Do not charge the appliance longer then 10 hours and at
temperature lower then 0°С and above 40°С! Optimum temperate to charging is 5°С to 35°С.
Usage time with fully charged batteries is approx. 45 minutes.
To keep capacity of the battery for a long time, charge it at least once in 6 months, even if the clipper is not in use.
CHARGING
To charge the battery, plug the AC adapter into the connector (6) on the bottom of the clipper and insert the plug it into a power outlet. Indicator will lights on and keep lightning while charging.
While charging the clipper must be switched off.
After 8 hours of charging, unplug the power cord of appliance from mains, indicator will lights off.
It’s not recommended to use the clipper during charging.
INSTRUCTIONS
Before starting a hair cut inspect the clipper, ensure that it is free of oil between the cutting blade teeth.
Switch the appliance on to distribute the oil and make sure it is running smoothly. Wipe off any excess oil.
While using the appliance, untwist the cord from time to time to avoid tangling.
Seat the person so that the head is at your eyes level. That provides better control of hair cutting.
Before cutting comb hair to ensure that there are no tangles.
Place a towel around the neck and over shoulders of the person having the haircut.
