-
13
-
-
14
-
. E053$
. E054$
DISABLE
ENABLE
In Batch Mode, data will be temporarily stored in memory buffer
(2KB RAM) when the scanner is out of range or in poor connection
quality. Once the scanner gets back in range, the stored data will
be sent back to the host immediately, which will also be erased in
memory buffer at the same time.
Batch Mode can only function in the following conditions:
1. The scanner has been connected to a host device.
2. The scanner is NOT in Memory Mode.
BATCH MODE
INTERFACE SELECTION
. C006$
*.C006$*
USB VCP
. C008$
*.C008$*
USB HID
BT HID
BT SPP
. E042$
*.E042$*
. E043$
*.E043$*
1.
BT HID
-
Emulates a
Bluetooth HID keyboard
that transmits
each barcode data to the host. (see page 9 for defails)
2.
BT SPP
-
Emulates a
Bluetooth SPP device
that transmits
each barcode data to the host. (see page 9 for details)
3.
USB HID
-
Emulates a
USB keyboard
that transmits each
barcode data to the host.
4.
USB VCP
-
Emulates a
USB virtual com device
that
transmits each barcode data to the host.
