6 of 16
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
WS3664
INSTALLING THROTTLE CABLE
Step 1
– Remove carburetor cover by pressing clips.
Step 4
– Attach the throttle lever to the “T” grip handle,
as shown above.
Step 3
– Fasten the throttle cable as shown. Make sure
there is a nut on each side of plastic fitting. Make sure the
cable does not work itself out of the plastic fitting while
tightening.
Step 2
– The throttle has a rotating silver peg (A) with a
slot on one side of it. One end of the throttle cable has a
metal barrel (B) that fits into this slot. Insert barrel into
the slot so when the throttle cable is pulled, it will pull the
throttle open (toward the base plate of the screed).
B
A
