4.
Remote Configuration
User Manual VS-104D-3GSDI – V1.0
Page 20 of 39
5/2016
SNMP (Simple Network Management Protocol)
is compatible with both
SNMPv1
and
SNMPvec
. Settings for using SNMP are as follows:
SNMP Listen Port (0, 161, 1025 - 65535)
This port is for connecting an external device as an SNMP client. SNMP is not used
when the value is 0.
SNMP Trap Destination IP
Set the SNMP Trap Destination IP.
SNMP Trap Destination Port (0, 162, 1025 - 65535)
Set the SNMP Trap Destination Port. SNMP is not used when the value is 0.
D
D
N
S
DDNS
Select DDNS (Dynamic DNS) Encoder to use. One of the two can be selected.
Simple Network Management Protocol (SNMP)
is used by Network Management
Systems to communicate with network elements. SNMP lets TCP/IP-Based Network
Management clients use a TCP/IP-Based internetwork to exchange information about
the configuration and status of nodes. SNMP can also generate trap messages used to
report significant TCP/IP events asynchronously to interested clients. For Example: a
router could send a message if one of its redundant power supplies fails or a printer
could send an SNMP trap when it is out of paper.
