CV620-TBI/TWI User Manual
www.marshall-usa.com
10
11
• Metal plate B - ceiling side
Plate B locking bolt
Plate B locking screw
M3 threaded hole
M3 threaded hole
M3 threaded hole
Metal plate B ceiling side
3.4.2.3 Precautions for Installation
• Before installation, confirm the orientation of the machine relative to the subjects
to be captured.
• It is recommended that the machine be set at 1.5 meters or more from the subject.
Please choose a distance most appropriate to the zoom settings of camera.
• The machine (including metal plates) is weighed at about 2.5 kg. If it is to be installed on
the ceiling, please use the hanger that has obtained UL security approval to prevent the
machine from breaking loose and falling.
• Please check camera on a regular basis to ensure it is secure and stays secure.
Projector
Computer
1.5 meter
3.4.2.4 Installation Steps
1.
Adjust resolution on DIP switch before installing camera
Note:
Please refer to Chapter 6 DIP Switch Setting for the relevant
descriptions on DIP switch
2.
Fix the plate A on the machine base with 4x M3 silver screws
3.
Lock the metal plate B on ceiling mounted hanger
Note:
(1) Please use the hanger that has obtained UL security approval
(2)Reserve the hole for the connecting wires
4.
Combine the metal plate A and the metal plate B
(1) Push the metal plate A up to the ceiling and then to the right to
latch the metal plate B
(2) And then secure with 2x M3 silver screws and 1x M3 black screw
