OWNER’S MANUAL
MODEL 180150
– LED LIGHT RETROFIT KIT
1
180166 RV011821
Copyright © 2020 Marshall Air Systems, Inc
All Rights Reserved
BEFORE INSTALLING THE LED LIGHTS
1. BEFORE INSTALLING THE LED LIGHTS, UNPLUG POWER FOR THE DUMP STATION.
FAILURE TO DO SO MAY RESULT IN ELECTRICAL SHOCK.
2. To prevent injury, allow dump station to cool if needed. Do not install while dump station is
hot.
3. If there is a Carton Holder loosen two screws to lift off Carton Holder.
4. Lift off and remove Heat Guard.
5. After the dump station has been unplugged and cooled remove all four existing light bulbs.
6. Shine a flashlight into the two empty light sockets on the right side. Inspect for any debris or
obstruction. Remove any obstruction such as a broken off tip of a previous light bulb.
Summary of Contents for 180150
Page 2: ......
