OWNER’S MANUAL
MODEL 180150
– LED LIGHT RETROFIT KIT
6
180166 RV011821
Copyright © 2020 Marshall Air Systems, Inc
All Rights Reserved
ATTACH THE LIGHT SOCKET COVER
1. The LED Light Kit comes with two Light Socket Covers. Select the Light Socket Cover that fits
tightly over the exposed light sockets.
2. Push the Light Socket Cover up into the light bar until it snaps into place completely covering
the left side light sockets.
3. Replace the Heat Guard.
4. Plug in dump station and turn power on.
IF THE
LED’S DO NOT COME ON
1. Check sockets to make sure they are tightened.
2. Remove sockets and once again check for debris (make sure power cord is unplugged).
3. Check internal cords that plug into LED strips for tightness.
Summary of Contents for 180150
Page 2: ......
