ERROR MESSAGE
Power on zero count under calibration
zero –10%
6. Power on zero count over calibration
zero +10%
5
1. LOW BATTERY
If battery is discharged, the display
will show LOW. The operator should
replace the battery.
2. OVER ZERO
If zero count is higher than the setting
range, the display will show “Err”
message. The scale will turn off in 30
seconds if the status continues.
cocontinues.
4. OVERLOAD
3. UNDER ZERO
If zero count is below the setting range,
the display will show “Errl” message. The
scale will turn off in 30 seconds if
the status continues.
If the total load exceeds the maximum
capacity of the scale, the display will show
“Err” message. The weight must be removed
immediately from the surface.
