Owner’s Manual -
30” Metal Oscillating Pedestal Fan
2
SAFETY INFORMATION
WARNING
1. Read and save these instructions. Do not operate fan unless you have read these instructions.
2. Unplug the fan before moving it or performing maintenance. Do not touch the fan when your hands are wet.
3. Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
4. Unplug the fan when it is not in use.
5. DO NOT unplug the fan by pulling the power cord. Unplug by holding the plug and pulling.
6. DO NOT use the fan when there is damage to the power cord or plug. If the supply cord is damaged, it has
to be replaced by the manufacturer, its service agent or similarly qualified persons.
7. DO NOT use the fan with extension cord.
8. DO NOT use the fan close to fires.
9. DO NOT insert your hand or other objects into the grille or the movable parts.
10. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
11. DO NOT use this fan outdoors, this fan is designed for indoor use only.
CAUTION
1. Unplug the fan from the socket and clean it with a soft cloth.
2. DO NOT immerse the fan.
3. Verify all fan guards are securely in place before operating the fan.
4. This fan is not intended for use by people (including children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge unless they have been given supervision or instruction
concerning use of the fan by a person responsible for their safety. Supervise children to ensure they do not
play with the fan.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly moisten a cloth
and then wipe off the surfaces of the fan. In order to remove the dust from the grill, use a vacuum cleaner or
remove the front grill by removing the securing screw on the edge of the grill with a screwdriver. After cleaning,
remount the grill. After doing this, fasten the securing screw on the edge of the grill.
ASSEMBLY INSTRUCTIONS
Remove five screws
from the base. Save
them for Step 2.
1.
Insert the spring into the support
post as shown in the picture.
3.
Attach support post
to base by tightening
back the five screws
from Step 1.
2.
Remove three screws on
black ring around extension
pipe. Save them for Step 5.
4.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
145X210MM
Remove the hexagon bolts, bolt sheaths and
washers, hexagon head square strength bolts,
hexagon flange lace nuts from the top of the
extension tube and save them to step 7.
Install the fan head on the extension tube by
fastening the hexagonal bolts, bolt jackets,
washers, hexagonal square stiffening bolts
and hexagonal flange lace nuts in step 6.
SFSI-750SW
For additional information on the product or replacement parts, call
our Customer Service Department at Mars’ tel no.
