22201302
Page 2 of 6
Rev. A
Instructions
1.
Disconnect and remove the OBA Transport from the jukebox. Set it aside.
2.
Remove the stacker and it’s harness from the jukebox by removing the 2 front mounting screws and loosening
the 2 rear screws as shown in Figure 2. Save the screws for use later in Step 8.
Figure 2
3.
Remove the plastic faceplate from the OBA-2 Transport. Save the 4 philips screws for use later in Step 7.
4.
Remove (4) #8-32 nuts and the #8-32 screw to remove the OBA-2 Transport from it’s Mounting Bracket.
Save the (4) nuts.
Remove these 2
screws
Loosen these 2 screws
