SOLO-KC
INSTALLATION MANUAL
Page 18
9.6
INTERCOM
Intercom functionality is supported by a set of parameters, used to tweak the functionality to each
user needs.
For each button SOLO-KC incorporates a group of parameters. There are up to 8 groups of
parameters.
9.6.1
xTN1 to xTN5 parameters
Parameters are the call numbers for intercom application.
9.6.2
RTNx parameter
Parameter defines the ring time time-out. RTNx timer is started when the call button is pressed. If
the RTNx timer expires before the GSM voice connection is established then SOLO-KC device
calls the next number in xTN1-xTN5 call list.
NOTE
When the button is pressed the call if first made to the 1
st
telephone number on the list,
if the user under 1
st
telephone number on the list does not answer the call than the call
is made to 2
nd
number if this user answers the call, than SOLO-KC will not call further
numbers.
9.6.3
DTMF auto dial functionality
This function is used to provide a support for SOLO-KC device to be able select extended numbers
via DTMF command.
9.6.3.1
SDNx parameter
Parameter is used to set the DTMF number in auto self select function.
9.6.3.2
SDDx parameter
Parameter is used to set the delay (in s) for sending DTMF number in auto self select function.
NOTE
After the voice connection is established the SOLO-KC will send out SDNx DTMF
number, after SDDx time out time. Useful function for automatic extension selection.