SOLO-KC
INSTALLATION MANUAL
Page 11
Example:
Direct programming on the SIM card
SOLO-KC PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
OS1
1
Bi-stable toggle mode
OS1
14
Mono-stable pulse mode ( 14s pulse )
OD5
1
NAC event activates output 1
OP1
1
Output 1 inverted
Table 5: Output management parameters example
Remote programming by SMS
;OS1=1;OS1=14;OD5=1;OP1=1;
NOTE
SOLO-KC has only 1 output, please do not use this output in many functions, because
it may result in confusion.
9.3
SECURITY LEVEL - SL
SL parameter from 0 to 5 defines which telephone number stored in the phone book from TN1 –
TN5 can enter into programming and remote control of the SOLO-KC (dialing the SOLO-KC
phone number or sending the SMS).
NOTE
When the SL level is 0, an access to the SOLO-KC is possible from any phone!
IMPORTANT
Before any SL number is programmed the SOLO-KC can accept ALL CALLS.
Remote SMS programming and remote controlling is possible from any phone!
Name / value
Comment
SL = 0
All calls and SMS are accepted
SL = 1
Only number stored under parameter TN1 has access to unit
SL = 2
Numbers stored under parameters TN1 to TN2 have access to unit
SL = 3
Numbers stored under parameters TN1 to TN3 have access to unit
SL = 4
Numbers stored under parameters TN1 to TN4 have access to unit
SL = 5
Numbers stored under parameters TN1 to TN5 have access to unit
Table 6: SL parameter