045%045%045%6XUURXQG,QVWDOODWLRQ
Surround Kits are available in 3 different finishes:
045%
045%
045%
6PDOO
[1-
1/2”]
/DUJH
[4”]
6PDOO
[1-
1/2”]
/DUJH
[4”]
6PDOO
[1-
1/2”]
/DUJH
[4”]
MQRB4419SBL
MQRB4419SSS
MQRB4419SPW
MQRB4424SBL
MQRB4424SSS
MQRB4424SPW
MQRB5019SBL
MQRB5019SSS
MQRB5019SPW
MQRB5624SBL
MQRB5624SSS
MQRB5624SPW
MQRB6919SBL
MQRB6919SSS
MQRB6919SPW
MQRB6924SBL
MQRB6924SSS
MQRB6924SPW
-
%ODFN
6WDLQOHVV6WHHO
3HZWHU
(DFKNLWFRQWDLQV
(Qty-1) Surround Frame
(Qty-2) Surround Side Fillers
(Qty-1) Surround Access Cover
(Qty-8) #6 Self Tapping Screws
7KH6XUURXQG)UDPHVDUH´WKLFNZLWKDô´VSDFHEHKLQGWKHIUDPH7KH)LUHSODFHPD\EHFRYHUHG
XSWRZLWKLQò´RIWKHRSHQLQJZLWKQRQFRPEXVWLEOHPDWHULDOV
6XUURXQG,QVWDOODWLRQ
1.
1RWH
Original Side Fillers & Valve
Access Cover will not be used.
2. The Lower Front Face Panel must
be installed on the fireplace before
surround can be installed.
3. Remove Glass Door from
fireplace.
4. Hook lower ledge of Surround
Frame onto the Lower Front Face
Panel of the fireplace. With top of
Frame tilted outward, slide Side
Fillers behind Surround Frame.
5. Push Surround Frame into place
and install using the existing screw
holes in the tile lip. Front Edge of
the Side Filler must rest between
Surround Frame and Fireplace
[see
ILJ
].
6. Fasten the Side Fillers to the
fireplace using the two [2] existing
holes on either side of the firebox
opening.
7. Replace the Glass Door and put
the new Valve Access Cover into
place with angled ends to match
Side Fillers.
!
127(6
: Cotton gloves
PXVW
be worn to protect the finish during installation and handling.
All hand and finger marks
PXVW
be cleaned off with a soft cloth and light detergent prior to applying heat to the unit.
Stainless panels may discolor a little during normal operation. This is normal and should not be considered a defect.
50
