MQRSP39 Glass/Rock Tray -Conversion Guide
Part No:
MQRSP39BL
Contents: RSP Rock Tray
Lamp Shield
Cover Plate
Media Options:
MQROCK2
- Rock Set – Contemporary Collection [Neutral Colour]
MQROCK3
- Rock Set – Contemporary Collection [Multicoloured]
MQG5W
- Decorative Ember Glass [White, 5lbs]
MQG5A
- Decorative Ember Glass [Turquoise, 5lbs]
MQG5C
- Decorative Ember Glass [Copper, 5lbs]
This appliance is designed to accommodate either a log set or a glass/rock tray, using rock or crushed glass.
To convert to the glass/rock tray:
1. Remove the Grate Bar assembly (Fig. 1). If Rocks are to be used, skip to step 4.
2.
For Crushed Glass Only:
(Fig.2) Unfasten the Lamp Plate, as well as the Burner Tray Extensions (These will
not
be
reattached). Flip the Lamp Plate around so that the mounting slots are pointing downward. Then, insert the slots on the
Lamp Plate into the mounting slots located in the burner support bracket.
3.
For Crushed Glass Only: (
Fig.3) & (Fig. 4) Slide Lamp Shield over Lamp Plate. Insert tabs of Cover Plate into slots on
Lamp Shield (See note in Fig. 4).
4. Align the Glass/Rock Tray on top of the burner assembly and then lower it into place. There are no fasteners required to
hold this tray in place. See illustrations below for more information.
Rock Setup
Crushed Glass Setup
(Fig.1)
(Fig.2)
Burner Pan is shown removed for clarity only.
Crushed Glass Setup
(Fig.3)
Note:
Cover Plate
is not
used with 3927ML or PL.
Leave
Cover Plate
at 45°
for Brick Liners.
Push
Cover Plate
down to
0° for 4634ML or PL
Crushed Glass Setup
(Fig.4)
28
Summary of Contents for Cove MQZDV3927
Page 37: ...37 ...
