PRL- Porcelain Liner Panels-
Preparation:
1. Lift Log Supports out of fireplace.
2. Remove the 2 Screws in the Back Panel.
3. Slide and tilt Back Panel to remove.
To Install
:
1. Place Back Panel up against the back of the Firebox and reinstall the 2 Screws.
2. Remove the 2 DT Screws in the sides of the Firebox holding the Brick Clips in place.
3. Tilt and slide the Side Panels into place. Reinstall the 2 DT Screws without the Brick Clips.
4. Replace Log Supports
Parts List
-1 Back Panel
-1 Right Side Panel
-1Left Side Panel
Log Supports
Back Panel
Left Side Panel
Right Side Panel
Note: Warping and
Discoloration of Porcelain or
Painted Metal Liners Is Not
Covered Under Warranty.
Both Porcelain and Painted Metal
Liners may discolor and warp
during normal operation of your
appliance. This is normal, and not
considered a defect
.
28
Summary of Contents for Capri IDV34 Series
Page 46: ...Gas Conversion for Modulator PART C 46...
Page 59: ...Proflame 2 Remote Control 59...
Page 61: ...61...
