OUTDOOR INSTALLATION
To install the vessel outdoors, a flat level concrete reinforced pad at a mini-
mum thickness of 152mm - 203mm is required.
Placement of the vessel on pavers, gravel, or dirt is not approved and will
void the warranty. The reinforcing material should be attached to a #8 AWG
bonding wire per national and local electrical code.
INDOOR INSTALLATION
There are special requirements if you place your vessel indoors. A flat level
concrete reinforced pad at a minimum thickness of 152mm - 203mm is re-
quired. Flooring material must provide adequate traction when wet. Proper
drainage is essential to prevent water puddling. Proper ventilation to the
area is required. The addition of a ventilation system is recommended. Please
see your contractor for details.
outdoor & patio installation
