GENERAL OPERATION (see figure A)
ON/OFF
Press PWR button (1) to turn on the unit. Press it again to turn it off.
FACEPLATE RELEASE
Press REL button (2) to detach the removable faceplate.
SELECT AUDIO MODE
Press SEL button (3) for change audio mode through volume, bass, treble and balance
modes. Use (4) and (5) buttons for adjust the selected mode.
When mode has not been adjusted for 3 seconds, display returns for normal radio or
CD display.
Volume: Adjust volume level by using (4) and (5) buttons.
Note: The unit is initially set to volume mode.
Bass: Press SEL button (3) one time. Adjust bass level by using (4) and (5)
buttons.
Treble: Press SEL button (3) two times. Adjust treble level by using (4) and (5)
buttons.
Balance: Press SEL button (3) three times. Adjust sound balance between left and
right speakers by using (4) and (5) buttons.
LOUDNESS
Press and release RND/LOU button (11) immediately for reinforce the bass output.
TIME SETTING
Press DSP button (6) for change the display for clock display, if no key is activated
in 5 seconds, it will automatically return for previous display. Press and hold the DSP
button (6) for 3 seconds until the clock display flashes. Press (5) for change minutes
or (4) for change hours.
SELECT MODE
During CD operation, press BND button (7) for switch for radio mode. During radio
operation, when a compact disc is inserted in the disc slot, press >II button (12) for
switch for CD mode and start playing.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (17).
LED
When the front panel do not install on the unit, the LED indicator (18) is flashing.
RESET
Press RESET button (19) to re-initialize the unit in case abnormalities or malfunction
is observed. When reset is activated, all preset station/program will be cleared.
Reset button can be access by.
VOL
BAS
TRE
BAL
(Volume)
(Bass)
(Treble)
(Balance)
3
