ENGLISH
27
INSTALLATION
Installation on wooden stud in wall
WARNING:
Check that the wall can support the weight of the bracket and the appliance it is to hold.
Tighten the screws firmly, but not too hard – risk of material damage.
Fasten the screws in the middle of the studs.
The supplied installation parts are intended for mounting on wooden studs behind standard
chipboard/plasterboard, or the like. Make sure to use suitable parts for the installation.
Locate the edges of the studs with a stud detector. Draw a vertical line at the middle of each stud.
Put the wall plate against the wall and mark the centre of the four holes on the centre line markings
for the studs.
Drill 4 holes with a diameter of 3 mm and depth of 30 mm, and insert 4 screws (P-A). Check that
the plate is horizontal.
Stud
