EN
38
recorded video material from being
shown on the screen. The reversing
camera can be used as normal.
• When playing video material from DVD
or an external source when the parking
brake is not applied or correctly
connected, the video signal is blocked
and the message "Parking is enabled.
No video while driving.” is shown on the
screen.
FRONT PANEL
1. On/Off (press down) and MUTE (tap)
2. Return to screen (start image)
3. Frequency band button
4. Vol+/Vol–
5. Function selector
6. USB port/SD card slot
7. AV input
FIG. 7
REMOTE CONTROL AND BATTERIES
NOTE:
Read the safety instructions for the remote
control and batteries.
Remote control
1. On/Off
2. Function selector
3. Frequency setting and track selection
4. Frequency mode (equalizer, EQ)
5. Shortcuts (preset stations)
6. Playback/pause
7. Decline/end call
8. Answer/call
9. Frequency band and system selector
10. Audio off/on
5 Green
+ green/
black
Rear left speaker.
6 White +
white/black
Front left speaker.
7 Grey +
grey/black
Front right speaker.
8 Purple
+ purple/
black
Rear right speaker.
Connection of outer wiring
Connect the other end of the supplied standard
connector to the electrical system as shown in
the diagram.
FIG. 6
1. White
2. Grey, earth
3. White
4. Synchronisation of remote control from
other manufacturer
5. Reversing camera (purple)
6. Parking brake (pink)
7. 12 V power supply from reversing camera
8. connect
9. Radio antenna
10. Signal wire from reversing camera
IMPORTANT:
No video functions other than the reversing
camera must be used to ensure safety in
traffic when driving. The product therefore
automatically blocks the playing of video
material when driving. Park in a safe place
and apply the parking brake before looking
at video material.
NOTE:
• The video blocker, which is connected via
the parking brake, only prevents
