MarMonix MLD-705, User Manual

Page: 5 / 21

2. Start-Up
Inserting/replacing
batteries (see
“Figure A”)
1) Remove battery
compartment lid.
2) Insert batteries,
observing correct
polarity.
3) Close the battery compartment again.

Replace the batteries when the symbol “
” flashes permanently in the display.

Use alkaline batteries only.

Remove the batteries before any long
period of non-use to avoid the danger of
Corrosion.
Keypad (See “Figure
B”)
1. ON/MEAS button
2. Area/Volume
button
3. Indirect
measurement
button