E
N
G
LI
S
H
7
Speaker Anywhere 400™
Speaker lighting ON/OFF
The atmospheric lighting can be switched ON/OFF on both the remote control and the
speakers with the “Light” button [7/16].
Switching the speaker ON/OFF/Stand-by
1. Turn the speaker ON/ OFF by pushing the button at the front of the speaker [6]. The blue
signal LED on the speaker indicates whether the speaker is switched ON or OFF.
2. Use the button of the remote control [13] to switch the speaker to stand-by mode. The
blue signal LED [3] will turn green.
Power save function
When not in use, both the transmitter and the speakers automatically switch off to prevent
unnecessary use of energy in cases mentioned below;
1. When the speaker is switched to the stand-by mode using the remote control (the blue
signal LED at the front of the speaker turns green) it will automatically switch off after 5
minutes.
2. When the transmitter does not receive any signal or a weak audio signal for 4 minutes it
will automatically switch off. The transmitter will automatically switch on again if a (strong)
audio signal is recognized.
FREQUENTLY ASKED QUESTIONS
No Sound
Ensure;
* the speaker is switched ON (the LED on the speaker is blue).
* the audio source is switched ON and playing (the LED on the transmitter [3] is blue).
* the volume of the audio source and speakers is high enough.
* the power adapter is fully inserted into the wall outlet and the Power connection (DC IN)
on the transmitter [5] and speaker [11].
* the battery capacity is sufficient. Replace with new batteries or connect a power adapter
to the speakers.
Distorted sound
* Press the “AUTO TUNING” button [8] on the speakers to tune the right frequency.
* Select an other channel (1, 2 or 3) on the transmitter [4] and press on the “AUTO TUNING”
button [8/14].
* Check the battery capacity. Replace with new batteries or connect a power adapter to the
speakers.
* The speaker is too far from the transmitter, move closer.
* Input level of the audio source is too high or too low. Adjust the volume of the audio source
until the sound is received correct.
Summary of Contents for SPEAKER ANYWHERE 400
